Chevrolet Cruze Forums banner

wire

  1. Gen1 1.4L Turbo
    I have a 2011 Chevy Cruze LT and today while cleaning the negative battery terminal with a battery brush, the ground wire that is bolted to the terminal broke off. It was very flimsy and makes me wonder how it held up all along. Can that wire be replaced without going to a mechanic and I...
  2. Gen2 Audio & Electronics
    Hey guys - not sure if I'm in the right section but I was wondering if anyone can help me identify the wires on the outside, larger tail light assembly that houses the turn signal. The plug has 3 wires, black, red and gray. I'm assuming black is negative. The taillight has 3 functions - night...
  3. Gen1 Audio & Electronics
    I have a 2018 chevy cruze base model. Looking for a suitable remote wire to hook up aftermarket amp. It's the only thing left to hook up and it's frustrating the **** out of me.
  4. Cruze Parts
    Hey so I recently redid my entire audio system (and by recently I mean January I just got lazy to put these up) and I have a bunch of random pieces that a. I didn't use, or b. stock components that I thought I would just post here to see if anyone wants them. If not then I'll just throw them...
  5. Gen2 Audio & Electronics
    Does anyone know where I can find a schematic of the Bose amplifier connections for a 2018? I'm installing an aftermarket amp, and I'm looking to tap the ACC power for the Bose amp. Thanks!
  6. Gen1 Diesel Technical Discussion
    2014 Chevy Cruze Diesel. I saw this wire and I’m not sure where it is suppose to go. Anybody know?
  7. Gen1 Audio & Electronics
    I just recently put in a new touchscreen pioneer radio and I wasn’t sure what to do with my light green wire. (Parking Brake wire). So I then realized that I need it hooked up to my postive side of my parking brake to get my Bluetooth portion of my radio to work. If someone could give me...
  8. Gen2 Audio & Electronics
    I tapped into the overhead map lights. They are hot when the car is on and go cold 10 minutes after you leave the car. Once you pull the harness controlling then lights, add the ground to the black wire in the left and hot wire to the wire on the right. Tape them together, stuff the extra wire...
  9. General Discussion
    I would like to know if there is an aftermarket product that has the wiring harness and sensors to retro fit a TPMS and have it display on the dashboard instead of the retro fit plug & play devices out there that adds "clunk" to your car environs. Oszie 2014 Chevy Cruz LS (Manufactured in...
  10. Gen1 Appearance, Body, Detailing, & Interior
    Hello, my backup light is dead, and I need to replace it. The thing is that I think that I will need to remove the rear fender completely, is there any way to access the wires of this light without removing all this stuff? Maybe removing the back side panel, where the right rear light (brakes...
  11. Gen1 Audio & Electronics
    If I were to run a small gauge wire from the engine bay to the fuse panel inside the cab of the car, where would be the best place to run it through the firewall? I see a large rubber seal of some sort with a large wiring harness running through, but I'm not sure if I should go poking holes in...
  12. Cruze Parts
    This is a pack of 5 Terminated Leads. I bought them to run my Rear Camera leads from the radio to the X200 Body Harness but they are not the right leads. Brand New Never Installed. Purchased them for $7.99 on Ebay with $5.99 shipping so I would like to get $13.98 for them but I am willing to...
  13. Gen1 Audio & Electronics
    I have a '14 cruze that I added a MyLink to. My harness from radio to the body has all the camera wires in it but I need to swap out the wire harness trunk side so I can plug and play my camera. Anyone who has a OEM MyLink with backup Cam can you please tell me the part number for the wire...
  14. Gen1 Audio & Electronics
    Hi I’m wondering how to wire a 2 channel amp for my 6x9’s in my rear deck. The amp I’m using has a high level input. So how could I wire it onto a stock radio.
  15. Gen2 Audio & Electronics
    Hey guys, I've traveled far and wide in search of an easy single sub/amp setup in my non-Bose 2017 Cruze Premier. It's hard finding much info on this body style. I've pieced together a lot from this forum and other websites so currently I have: PAC Loc spliced into the rear of the infotainment...
  16. General Discussion
    Here a stupid question - desire to replace my 2015 factory headlights with HID lights - trying to do the first step and disconnect the main wiring plug from the factory light. I've pulled out the little gray locking tab, but cannot remove the wiring plug from the light... it will not come lose -...
  17. Gen1 Audio & Electronics
    I've searched the forum but couldn't find the exact info I'm looking for. I have a 2016 cruze limited. My plan is to replace the two front stock speakers as well as add subs in the back. My question pertains to the subs. I'm planning to tap into the speaker wires behind the factory radio, then...
  18. Gen1 Service Issues
    Hey, long time lurker here first time poster. Does anybody know what the side wire/post on the negative battery cable goes to or does? My 16 Cruze got in an accident and my body shop did a real bad job putting in all back together as this "side wire" is really low gauge and looks stripped when...
  19. Lighting
    I'm considering doing a retrofit with some HIDs. I've read around that the fluctuating voltage of the headlights for the DRLs damages the HID system. This relay harness I speak of I'm pretty sure was some home-made harness being sold on some website that essentially turned the turn signal bulb...
  20. Gen1 Audio & Electronics
    so ive read a bunch of threads on passing a power wire through the firewall for people with manual transmissions. my cable is too large to fit through with the rest of the factory wires. has anyone drilled a hole through the firewall to run a very large power wire through? the wire is the...
Top