Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 20 Results
  1. Gen1 Audio, Electronics & Electrical
    Greetings, So a while back I had a pioneer deck installed, which sucked, and they had to use an aftermarket backup camera. I have since installed a different one (a tesla-style android unit), but I cannot figure out which wire comes from my stock backup camera. The deck recognizes when I put...
  2. Gen1 Audio, Electronics & Electrical
    Ok so I'm getting ready for a sub/amp install (it's in the mail :). I see people running thru the upper grommet but mine is super stuffed but noticed another empty space... Can I use this and what am I missing in mine?! Pics below
  3. Gen1 Audio, Electronics & Electrical
    Hi I'm trying to add some interior lights, and need to figure out the wires in the door. More specific, I'd like my added light to come on along with the remaining dashboard light, when sensors find it dark enough. I was thinking, that since the window control button lights up it should be...
  4. Gen2 Audio & Electronics
    I'm going to installing an auto dimming mirror into my Cruze this weekend and need a wire diagram of the overhead console to help me with identifying what to tap into. Thanks! Sent from my SM-G965U using Tapatalk
  5. Gen2 Audio & Electronics
    Looking to take from factory speaker outs and add a line converter for an amp. What's the best way/best place to do this with base MyLink?
  6. Gen1 Audio, Electronics & Electrical
    Just wondering if anyone has ever done this and if you did, how did you do it...???
  7. Gen1 Audio, Electronics & Electrical
    First off, because this is very important for me (and frustrating lol) I'm going to kindly ask those who have done it (which numerous ones of you have because I've seen your finishe product) to be the only ones to reply to this thread. I need actual facts and real methods, not guess work. So my...
  8. Gen1 Audio, Electronics & Electrical
    Hey guys so im doing an system install on a chevy cruze this week that will require a Line out converter. I know how to hook them up, im just curious where the best place would be to tap into the speaker wires would be at? I was thinking about taking the the left 2 doors off or just the back 2...
  9. Gen1 Audio, Electronics & Electrical
    Hey guys. I searched the forum and couldn't really find the right answer. Anybody ever take their mirror off and find out which wire is the 12v hot wire in the mirror and which is the ground? I don't have any probes thin enough to fit in to find out. Background is it's a '12 Eco manual. Any help...
  10. Lighting
    Can anyone tell me the easiest place to access the center brake light wires? Just need to tap in so I can do it basically anywhere. I want to make sure that I'm tapping into ONLY the center brake light wires though and not all 3.
  11. Gen1 Audio, Electronics & Electrical
    Big audio noob--- Hey everyone I was cleaning out my car with my amp attached to the back of my backseat. Not sure if the wires came loose and touched but now my wires won't power any amp I try plugging into them. I changed the fuse under my hood although it didn't appear to be fried and made...
  12. Gen1 Audio, Electronics & Electrical
    I've done my searching around the forum for some time but can't find an answer to my question. Everywhere I look I see the left rear speaker wires being referenced as dark-green/dark-green black stripe. I'm only seeing a lighter green pair twisted together in my car though below the harness and...
  13. Gen1 Audio, Electronics & Electrical
    Hello, I am running speaker wire and I need help removing the rear side airbag connector so that I can remove the trim piece behind it. Does anyone know how to remove this?
  14. Gen1 Audio, Electronics & Electrical
    Hello, My name is Helio and I am from Australia. I have a Holden Cruze which is a Chevy Cruze. I am trying to install an AMP and a SUB using the stock head unit. I have so far ran the AMP power cable from the battery to the boot under the floor and also the FUSE for the amp (addon a fuse). I...
  15. Gen1 Audio, Electronics & Electrical
    Hi, I'm installing automatic folding mirrors with turn signals on them to my 2012 LT. I need to find right and left turn signal wires as well as aac wire to tap into. Could you guys help me to find out those cables on driver side kick panel?! Thanks.
  16. Gen1 Audio, Electronics & Electrical
    Anyone have any pictures or tips on how to route wires for the REAR SENSOR for the ZR4 ShIFTER?...I would like to avoid drilling a hole in the trunk hood behind the license plate. I think you can route wires through the LICENSE PLATE LAMPS but I don't know if this is possible.
  17. Gen1 Audio, Electronics & Electrical
    I'm trying to mount a rear backup camera on the rear license plate does anyone have any tips, photos, or videos that demonstrate how the wires would be routed from the outside of the car to the inside? I would like to avoid drilling in the trunk's sheetmetal if possible. Thanks :):tempted:
  18. General Discussion
    I bought a dash cam off eBay a few weeks again with a guy from work. We were motivated by a rash of insurance fraud incidents in the city and figured we could post up interesting things we recorded onto YouTube. Here is the camera Installed. I ran all the cables along the gauge cluster...
  19. Gen1 Audio, Electronics & Electrical
    I'm trying to hook up my small Bazooka tube and I'm following a thread from this forum about adding electronics. I've accessed the wire bundle in the kick panel and I've found several twisted pairs but I can't figure out which wires form a pair of speakers, either fronts or backs. Here are...
1-19 of 20 Results