Chevrolet Cruze Forums banner

wrap

  1. CruzeTalk New Member Introductions
    Whuddup ya’ll, My brother was going to trade in his 2011 Cruze for a 2021 trailblazer. When I found out the trade in value ($2200), I figured I’d take advantage of the killer deal and take the Cruze off his hands in exchange for having him trade in my 2010 Malibu instead. Thought I’d join the...
  2. Gen1 Appearance, Body, Detailing, & Interior
    What type of vinyl wrap have you used? Trying to find a good brand of vinyl and who to buy it from so that it is good quality.
  3. Gen2 Appearance, Body, Detailing, & Interior
    My wife is driving our new cruze diesel and noticed the chrome trim pieces in the interior will reflect into her eyes and is distracting to her. This is more noticeable to her mid day when the sun is "high". I ordered some 3m nylon wrap in flat black and brushed aluminum to "wrap" the the...
  4. Gen1 1.4L Turbo
    This is an old ass thread, and I searched heat wrap and this came up. I initially thought of this because a guy at my local races has a turbo Volvo with the intake tube going right over the valve cover, and he covered the pipe that goes from the IC to the intake mani wrapped in exhaust wrap. A...
  5. Gen1 Appearance, Body, Detailing, & Interior
    Sent from my iPad using Tapatalk
  6. Gen2 Appearance, Body, Detailing, & Interior
    I started wrapping my interior today. I did the radio bezel and the center console so far. I also did the front emblem. I have a lighted base plate coming for the rear emblem so I will do that when the light comes in to make it easier to wrap off the vehicle I will also be doing the lower part...
  7. Gen1 Appearance, Body, Detailing, & Interior
    Before I start, I'd like opinions on the best headlights to install for both style AND bright lights. I just got done reading a huge thread regarding "not" installing HID's on Cruze's but I don't know if that was him being mad at people with HID's or him actually knowing what he's talking about...
  8. General Discussion
    I've had my 2013 Cruze LS for about 6 months now and I've recently decided to start putting into money customizing it. So for now, here is my list of what I want to do to the car: - HID headlights with RVinyl blackout smoke tint cover, and LED tail lights with the same blackout smoke tint...
  9. Gen1 Diesel General Discussion
    I bought a stock red CTD and I'm looking to change it up and make it stand out from the hundreds of other Cruzes around town appearance wise and performance wise. I want to black out the roof, but not with paint. I've seen some results of vinyl wrap and many PlastiDip projects but I cant...
  10. Gen1 Appearance, Body, Detailing, & Interior
    I was watching extreme off road today and he used a "new " product called dupli color custom wrap. It's very similar to plastidip but I was wondering if anyone else has seen it or used it? I personally love plastidip but am curious about this product. Sent from AutoGuide.com App
  11. Gen1 Diesel General Discussion
    Is there a vinyl wrap out there for the cruze vehicles? I was looking for a silver wrap and then of course the black rims! I'm sure it's a expensive but I was curious if anyone has it on their car and would he willing to share photos. Sent from AutoGuide.com Free App
  12. Gen1 Appearance, Body, Detailing, & Interior
    Just finished up wrapping the roof in gloss black at Vinyl Styles in San Carlos. Also installed the VG shark fin at the same time. Another small subtle change that is hard to tell unless mentioned is the gloss black B-pillars. Here is a side by side of one gloss and one the factory satin...
  13. Gen1 Appearance, Body, Detailing, & Interior
    Just got some Carbon Wrap on my car :)
  14. Gen1 Diesel General Discussion
    I'm not talking about chrome wrapping the CTD, but plastic wrapping it to protect the paint. Have anyone done it with their CTD or other vehicle that they own. If you do please tell us your experience. Was it good/bad? Which place does a good job and which one does a shitty one? I'm...
  15. Cruze Owner Projects
    I finally decided to try wrapping my center console's silver pieces with vinyl and i couldn't be happier with the results. They look great! I even decided to do the bowtie on the steering wheel. People said it wasn't possible to wrap it with vinyl because of the raised surface, but it's holding...
  16. Cruze Parts
    I have a kn typhoon system with amsoil dry filter and water jacket for sale, any questions shoot me a message
  17. Gen1 Interior Tutorials
    To start off I did a how to a few months ago on the center consul so I wont be going of that on this thread, click on How to Vinyl Center column... for the instructions. After a few months of thinking how to wrap the shift knob and not being able to find out how it comes apart I decided to just...
  18. Gen1 Appearance, Body, Detailing, & Interior
    I was looking at the silver trim on the steering wheel today and I thought, "wow if I want to did this it'll be hard". I don't want to spray the dip in my car because I don't want it to get it everywhere even if I tape it off and tons of newspaper. I would just be too nervous. So I am open to...
  19. Gen1 Appearance, Body, Detailing, & Interior
    First modifications - Wheel Bands and Vinyl "carbon" interior trim wrap with pics My 2013 2LT Manual Cruze is just a little over a week old, so what did I do? Start the mods!! :yahoo: I work at GM and a few months ago we had these guys in for a vendor show and I really liked the look of them...
  20. Gen1 Appearance, Body, Detailing, & Interior
    I just picked up a huge sheet of matte black vinyl, the one they use for vehicle wraps. Got it for free (just their scrap) and i still have a bunch left over, i just used it to blackout my bowties on the front and back and it looks perfect- a little heat, and it was all set. Im going to post...
Top