Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 190 Results
  1. Cruze Parts
    Hi so I have an AEM boost gauge and a matching AEM wideband gauge along with a ZZP a pillar pod that'll fit both gauges for a first gen Cruze. The AEM wide band is missing the sensor but that's it. And each one of the gauges has like one LED around the outside of it missing but other than that...
    $200 USD
  2. Cruze Parts
    This is my used ZZP intercooler and hard piping kit. It came off of a 2015 cruise LT. This is for turbocharged vehicles only. Comes with all the original piping, the original intercooler and the original silicone tubing. It's a bolt-on installation. I can actually do the install for you. No...
    $400 USD
  3. Gen I
    This is a set of brand new ZZP 80 lb fuel injectors. I bought them and got one size too big. When I got the e85 conversion done on my car. They're meant for very high boost and high fuel flow applications. You could run them on the street but probably a little bit too much there for full race...
    $160 USD
  4. Gen I
    So I have a ZZP A-pillar two gauge pod with matching AEM boost and UEGO gauges. The uego is missing the sensor but other than that it has all the wiring that goes with it. Both AEM gauges have an LED that isn't lighting up, but other than that the backlight and everything lights up and...
    $200 USD
  5. Gen I
    This is my used ZZP intercooler and hard piping kit. It came off of a 2015 cruise LT. This is for turbocharged vehicles only. Comes with all the original piping, the original intercooler and the original silicone tubing. It's a bolt-on installation. I can actually do the install for you. No...
    $400 USD
  6. General Discussion
    I bought the zzp high voltage coil pack and even told my tuner to tune for it but after I out it in it had 2 misfiring cylinders so I just put the original back in is that bad like would bnr have tuned for high coil it doesn't sound like it runs bad at all? Dumb question
  7. Gen 1 Tuning/Engine Modifications
    I replaced my cracked OEM turbo with the ZZP V3 turbo, and installed 42# injectors also. After waiting for Trifecta to get back to me with a tune, I took it for a drive and data log. My boost gauge is only showing between 15-17psi of boost at WOT, and trifecta’s tune is commanding 27psi. I’ve...
  8. General Discussion
    I have zzp catless downpipe and zzp highflow cat before 2nd o2 sensor and still get a cel light can I legit just keep adding extensions until it doesn't throw a code. Zzp sells 90 degree angled and straight extensions I think one of each would do the trick but have no idea if that's the way...
  9. Gen I
    I got interested in modifying my Cruze late last year during my junior year and now that I got the money EVERY PLACE doesn’t have them since the EPA is forcing them to find a different way to make them or whatever but I was wondering if anyone had one for sale willing to sell to me. Shoot me...
  10. Cruze Owner Projects
    Good morning y'all just received my bnr tuner which means things are gonna be rolling along very shortly. Figured I'd give a run down of performance mods I've done so far Zzp catless downpipe Rear muffler delete Zzp intercooler Zzp cold air intake Msd coil pack and new plugs Oil catch can...
  11. Gen 1 Tuning/Engine Modifications
    Just thought I would share my newest mods! ZZP intercooler, and midpipe added. Stage 2 with ZZP done. Test and Tune here we come !
  12. Gen I
    I bought them and they are just flat out too big for my car. ZZP will not work with me at all on an exchange or credit or anything because of a simple mistake, after I have purchased THOUSANDS of dollars worth of parts from them (which I am still pretty pissed about, and I kind of hope they see...
  13. Gen I
    I have a set of 80# injectors that installed and cannot get to work. They were only in for 30 minutes and are brand new with all packaging included. The car never left the driveway with them in. I'm looking to buy some 42# or 60# injectors as I'm doing a flex fuel conversion soon (already have...
  14. General Discussion
    Hey everyone. I recent bought a ZZP catless down pipe (o2 housing) and I’m wondering if I need to buy a programmer/tune for my car. I’ve heard the car could notice something is wrong and put itself in a “reduced power mode”. I still have my stock midpipe which has a catalytic converter in it...
  15. Cruze Parts
    Gen I 1.4T also want a set of Winjets
  16. Gen1 Powertrain
    Has anyone got the ZZP tune on their Cruze?
  17. Gen1 1.4L Turbo
    So I'm replacing my turbo but figured I wanna upgrade instead of staying stock. I was going to go with BNR kit but it's discontinued and I can't wait for the new kit because I currently don't have a car. I could go ZZP Big Wheel Turbo Kit, so I'm debating on that or go custom. I understand that...
  18. Cruze Parts
    I have a few parts left over from my 2012 Cruze project that was totaled by a careless driver on New Year’s Eve : / I prefer to ship to continental US only but willing to quote w/Canada buyers carrier of choice. ZZP Catless midpipe brand new in unopened box $160 shipped. (This will throw an...
  19. Cruze Parts
    Just as the title says. Here's the product link: https://zzperformance.com/collections/sonic-cruze/products/o2-housing-mid-pipe-package-for-cruze-1-4l Like new, only on for a couple thousand miles. Switched it with the stock one due to personal preference. Goes for $499.99 new, selling for $300...
  20. Gen I
    Stuff removed and now up for sale. BNR wastegate: $200-shipped-sale pending BNR- ls7 coil pack-(blue)- streetfire coils. Was shipped back and returned with beefed up brackets and supports and new harness. $450-shipped-sale pending MP fab intake, powder coated wrinkle blk. $200(Sold). BNR-...
1-20 of 190 Results
Top