Chevrolet Cruze Forums banner

2011 1.8l no crank no starr

669 Views 5 Replies 3 Participants Last post by  Meislilu
I'm finishing up a transmission swap and top end rebuild on a 2011 chevy cruze I plugged everything back up wire and mechanically wise but car refuses to crank don't know why I have tested fuses and wire and the only thing I could find was the solenoids wasn't receiving voltage when the key was turned anyone know why.
I also have a cam shaft code for sensor
P0016

P0597
P0598
Both are caused by a broken wire some what fixed and the last is intake adjustment mechanism
1 - 1 of 1 Posts

· The Nuclear Option
Joined
·
5,873 Posts
I'm finishing up a transmission swap and top end rebuild on a 2011 chevy cruze I plugged everything back up wire and mechanically wise but car refuses to crank don't know why I have tested fuses and wire and the only thing I could find was the solenoids wasn't receiving voltage when the key was turned anyone know why.
I also have a cam shaft code for sensor
P0016

P0597
P0598
Both are caused by a broken wire some what fixed and the last is intake adjustment mechanism
Will the engine spin manually?
 
1 - 1 of 1 Posts
Top