Chevrolet Cruze Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hey guys, ik this is going to be redundant, but just to be clear, do I have to get the BCM or whatever it is called done by the dealer if I want to wire my fogs in through the fuse box and to an OEM switch I bought for the fogs to look stock. I heard that only the 2013's don't have to but I'm not sure.

Thanks
 

·
Registered
Joined
·
6 Posts
Hey guys, ik this is going to be redundant, but just to be clear, do I have to get the BCM or whatever it is called done by the dealer if I want to wire my fogs in through the fuse box and to an OEM switch I bought for the fogs to look stock. I heard that only the 2013's don't have to but I'm not sure.

Thanks
I have a 2012 with after-market fogs. I have them linked into the fuel injector fuse so every time the car starts, the fogs come on. I also have a button inside the car coming thru where the fuses are where I can turn them off at any time. Hope this helps.
 

·
Premium Member
2013 Cruze LT
Joined
·
3,631 Posts
I have a 2012 with after-market fogs. I have them linked into the fuel injector fuse so every time the car starts, the fogs come on. I also have a button inside the car coming thru where the fuses are where I can turn them off at any time. Hope this helps.
That’s smart, I wonder if one could wire, say a dash cam to that to trigger it to come on as well?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top