Chevrolet Cruze Forums banner

2013 Rear Bumper Cover Question

1K views 3 replies 3 participants last post by  glava2876 
#1 ·
My son has a 2013 LT and ran over a curb hidden by snow. Luckily it only damaged the rear DS bumper cover and the alignment seems fine.
There is no paint damage, but the seam at the top where it meet the wheel opening was popped out about 1".
When he was home from college, I was able to push it back in, but it is still out a little and I can see a small piece of broken plastic at the front edge. I want to be sure that it doesn't come back apart and wondered if anyone knows how the rear bumper attaches on the top edge so that when he is home again I can fix it better.
Thanks
 
Discussion starter · #4 ·
Unfortunately he is at college now, so I'll be looking at it more next time he is home. Again, at the very front edge it was 1" I was able to push it back in to about 1/8" and it seemed to stay, but I could tell that at the very end something was broken -looked like a separate black plastic piece, which is probably the clip?
After pushing it back, it is definitely not something most people would notice, but I just want to be sure that it stays in place.
Thanks!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top