Chevrolet Cruze Forums banner

2014 radio TONES resetting

1173 Views 7 Replies 3 Participants Last post by  Al3e925
I just recently bought a 2014 cruze...but every time i start my car it sounds like butt...THE BASS, MID and TREBLE all are flat lined. Why does my car not hold the memory of the tones?

How do I fix this?
See less See more
1 - 8 of 8 Posts
Has http://www.cruzetalk.com/forum/25-g...al-coverage-14311-negative-battery-cable.html been performed? One of the symptoms is the radio loosing presets.
What verifying and or tightening the negative cable terminal? I highly doubt it, but will look / act now. Thanks!

Sent from my SM-G530P using Tapatalk
What verifying and or tightening the negative cable terminal? I highly doubt it, but will look / act now. Thanks!

Sent from my SM-G530P using Tapatalk
It's actually a replacement cable.
Checked, nothing was loose. Its weird because the stations, balance and all other settings are remembered just NOT the tones...

Sent from my SM-G530P using Tapatalk
It DOES have the correct cable...

Sent from my SM-G530P using Tapatalk
IIRC, the tone settings are per source. So, if you switch to a different source, it will switch to what was in memory for that source.

You might want to check the software update for the MyLink and see if that was addressed in a software update.
I took cables out, re crimped them all in my vice...holds all tone memory... wtf

Sent from my SM-G530P using Tapatalk
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top