Chevrolet Cruze Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter · #1 ·
I have installed the 94556229 TRUNK HARNESS and installed a camera on the rear.
However i don't have the UVC code on a 2015 Cruze and i don't know if that is just a wiring completion to work or the code has to be corrected on the radio.
All the wiring is from the Drivers 1/4 panel to the back of the radio.
all my connects are in place now.
the connection in the trunk has 14 wires at the main harness in the 1/4 panel which is a extra 5 wires.
.the camera has 6 wires which i believe it shares a ground wire in the trunk harness
Does anyone know where the code lives in the radio and how to program it.
I don't want to pay 200.00 to get it program by the site refereed here.
Can anyone help
Thanks In advance
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top