Chevrolet Cruze Forums banner

Added two 6x9 subs to rear deck! chyea!

39591 Views 18 Replies 12 Participants Last post by  NickD
So I did alot of research and came to a conclusion that I dont want a sub in my trunk at all! I wanted it stealth installed or hid away somewhere. Then again, I also didn't want bass that'll rock my block so I decided to go down a "premium" audio system route. On one note, this is for the cars without the pioneer upgrade as I only have the 6 speaker option. Next weekend I should get the rest of my parts in for the rest of my speakers but this is some pics from my install. I used two Tang Band subs Tang Band W69-1042J 6"x9" Subwoofer 264-837 (note: these are awkward shaped subs so they need to be custom fitted into the stock rear deck 6x9 holes! forewarned)
Along with the subs I used:
2x- 6x9 Universal MDF Spacers (too lazy to make my own and because they didn't come with templates. I am going to seal the spaces soon to make sure no sound will leak out but it is a mad tight fit)
8x- #8 1 [SUP]1/2 [/SUP]stainless steel bolts
8x - 8x Rubber washers
8x- Lock Nuts (these made the install perfect for doing by myself or else the speaker wouldve fell on my face!)
You will need to drill your own holes into the metal of course.

Here is a quick explaination on how to get to the rear deck. Credits to Cruze15 from
First, from inside the trunk take out the 2 screws that hold the third brake light in. pull down on the grey clip and then unplug the connector. Take it out now.

2nd, on each side of the car is a little plate that says AIR BAG, slightly pull the side out a bit and push the airbag plate out from the back. Take out the screw behind the plate. You might want to use a magnetic screw driver.

3rd, Pull gently on the side piece til it pops out of the 3 clips. Pull straight out btw.

4th, If the back seat is not already down then do so. Pull the plastic push clip on each side just under the latch. These clips old the rear deck to the back seat mount.

5th, lift up on the front part of the deck so you can clear the edges of the back seat mount.

6th, Pull the deck piece at an angle following the contour of the back glass.

In the end, they were completely worth it. They bump like crazy an they have an insane good response and sound reproduction. I can hear/feel it outside of the vehicle if i turn it up...and that isn't even blasting them. So really, they turned out to be the perfect sound I was looking for. I don't ever really have to turn them down as they aren't boomy as ported subs are. I installed these IB by the way IMO. Next week i'm installing a 4 channel amp, two sets of kenwood component speakers, and dynamating the doors and rear deck. Yes, I am custom mounting tweeters in the rear doors! I will do a write up when I'm done! Feel free to ask any questions I hope I filled in some gaps other posts didn't.


See less See more
  • Like
Reactions: 2
1 - 1 of 19 Posts
Hey I just got the 2014 diesel cruze with the upgraded Pioneer system. Its not the greatest I was gonna buy a line out converter and grab these tang bands with a spacer. Will any spaceer so I was looking at this Metra 82-6900 (met-826900) 6" x 9" Universal Speaker Spacers /. i just want to make the install as easy as possible
1 - 1 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.