Chevrolet Cruze Forums banner

Advice on Strut Bars

9801 Views 20 Replies 6 Participants Last post by  anthonysmith93
What's up fellow Cruzers, I need some advice on some front and rear strut bars. I have a 2014 2lt auto STOCK, and came upon bad news racing from a fellow member.

My question is, are these worth the price and effort? and If I do install these, is there anything I need to replace or also install to make this mod worth it?

Thanks in advance and any input or suggestions are greatly appreciated!


Welcome to Bad News Racing
1 - 2 of 2 Posts

· Premium Member
Joined
·
2,987 Posts
I would skip the upper strut bar. the way most are made they just attack to the top strut bolt so no good. you can pay a racing shot about the same to custom weld one to the top of the strut towers and run the aluminum bar. better results
 

· Premium Member
Joined
·
2,987 Posts
If you do strut bar have one welded on, the rest bolt on will do very well. a stiffer chassis works better and rides over hard terrain better but you will feel it.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top