Chevrolet Cruze Forums banner

Attention Australian Members--looking for part number and a reputable dealer

2394 Views 13 Replies 4 Participants Last post by  RoadRage
Good day gentlemen,

Im thinking of changing the 'ol Chevy and turning into a Holden...yes i know this will degrade the value, who cares..im running this thing till it dies...plus im sure theres plenty of kids in Hialeah that would take the car the way it is and some (iKerm and Calix know what im talking about). Anyways, can any member down under provide the part number for:

-Engine bay cover
-Door sill
-2013 SRi-V grill
1 - 14 of 14 Posts
Before you buy make sure the parts you order will actually fit. Remember the car is built in a different factory and the front is very slightly different.
Before you buy make sure the parts you order will actually fit. Remember the car is built in a different factory and the front is very slightly different.

Try This not sure if it will help though?

Holden Car Accessories & Parts - Holden.com.au
I have the front bumper and grill properly sourced for what I need. The difficult components are the items listed. Also in need of a tow hook cover.
..plus im sure theres plenty of kids in Hialeah that would take the car the way it is
This is so freaking true.

And just say you imported it from Australia lol. Can't wait to see how this will look like.
iKerm...heres a sneak peak as to what I am planning. Land vehicle Vehicle Car Motor vehicle Bumper
See less See more
iKerm...heres a sneak peak as to what I am planning. View attachment 44473
I think you have missed what the Holden looks like apart from the logo? View attachment 44481
Aussie,

I didnt forget what the current series 2 Sri-v looks like, however I am not 100% with the look of th e stock bumper. I am basically trying to create a one-off custom and rid all chevyness from the vehicle. I am highly fond of the Holden logo and I believe this is the closest I can get to an HSV/ ss styling for the Cruze. I just wanted to remain consistent with the badging not the overall return to stock look.

Sent from AutoGuide.com Free App
Aussie..one thing maybe you can guide me on...I would prefer a series 1 bumper but had no luck finding one on ebay.au or any parts shop in australia..the closest I found was a Daewoo Lacetti but required a minimum purchase of 10..

Sent from AutoGuide.com Free App
Aussie,

I didnt forget what the current series 2 Sri-v looks like, however I am not 100% with the look of th e stock bumper. I am basically trying to create a one-off custom and rid all chevyness from the vehicle. I am highly fond of the Holden logo and I believe this is the closest I can get to an HSV/ ss styling for the Cruze. I just wanted to remain consistent with the badging not the overall return to stock look.

Sent from AutoGuide.com Free App
If you closely at the front, a bit of white paint will get you close to what you want I believe?

Walkinshaw Holden Cruze Review | CarAdvice
Here are some parts including front bumpers on eBay.

holden cruze bumper in Car, Truck Parts | eBay
Aussie..im familiar with the Walkinshaw Cruze but I dislike the new series 2 bumper style only because there are no nice lips for it and they sell some nice addons to the series 1 style. As far as the grill, I am highly fond of the new sri-v dechromed. I saw the same bumpers on ebay but they are local pickup only and neither vendor had replied to my inquiries.

Sent from AutoGuide.com Free App
i have a 2013 sriv grill if your interested ?
Did the grill size/fitment change during the series changes..meaning does it have the same dimension as the grill on your 1st generation style?
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top