[Philb]

I've found a solution (so far at least) for the MyLink screen blanking out intermittently and the directional signal sound not working on my 2013 Cruze LT. I followed the advice on this video:

but that didn't work however when I pulled the #4 fuse for the Infotainment system, I remembered seeing a bit of brown corrosion on the fuse.

I used an emory board to clean the contacts, reinserted the fuse, and the problem has not returned and it's been almost 24 hours. The problem started three days ago and persisted daily but has not happened since cleaning the fuse. I'm hoping that a simple fix solved the problem.

 

[Philb]

I've found a solution (so far at least) for the MyLink screen blanking out intermittently and the directional signal sound not working on my 2013 Cruze LT. I followed the advice on this video: https://youtu.be/VwbYrL8Iq5A but that didn't work however, when I pulled the #4 fuse for the Infotainment system, I remembered seeing a bit of brown corrosion on the fuse. I used an emory board to clean the contacts, reinserted the fuse, and the problem has not returned and it's been almost 24 hours. The problem started three days ago and persisted daily but has not happened since cleaning the fuse. I'm hoping that simple fix solved the problem.

UPDATE: After four days it started again but only occasionally. I'll wait until it fails completely before bringing it to the dealer otherwise they probably won't find the problem.