Chevrolet Cruze Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Has anyone successfully mounted Brembo brakes on their Cruze? I've seen a post on a mock up with a Cobalts' Brembos. however they didn't fit. Is there a kit available for the Gen 1's?
 

·
Premium Member
2014 Cruze Diesel, 2007 Cobalt, 1981 Camaro Z28, 2017 Volt
Joined
·
5,880 Posts
Chris Tobin was in the process of gathering parts to test-fit the Cadillac ATS Brembos - but that would only apply to the 1st gen Cruze Diesel, since they share a bolt pattern with the ATS (the non-diesel Cruzes have a different bolt pattern).

As far as other Brembos, cannot say I've seen anything.
 
  • Like
Reactions: Blasirl

·
Premium Member
Joined
·
481 Posts
Chris Tobin was in the process of gathering parts to test-fit the Cadillac ATS Brembos - but that would only apply to the 1st gen Cruze Diesel, since they share a bolt pattern with the ATS (the non-diesel Cruzes have a different bolt pattern).

As far as other Brembos, cannot say I've seen anything.
I still haven't had the time to try to bolt the parts together yet... hopefully I can get it done soon... All the parts are just sitting here too...
 
  • Like
Reactions: MP81
1 - 4 of 4 Posts
Top