Chevrolet Cruze Forums banner

Clutch delay valve & accumulator delete on gen 2

1743 Views 37 Replies 6 Participants Last post by  JosQuelqu1

That may sounds weird but let me explain.

I've been driving manual since my first car but with the Cruze I can't figure out if the car is the problem or if it's me. I have a 2017 Cruze. It's like I don't know how to shift. I'd say 1/2 times I feel like a beginner when shifting gear. And don't think of going from 1 to 2 quickly or it will grind. As of right now I want to change the car for an automatic trans. I'll go with a Spark if I have to.

I read somewhere that is a "feature". RPM hang or something like that.

Someone feeling the same? Any advice?

Thank you!

If you don't want to read all, because why would you do that, here's the parts needed to delete the CDV and the accumulator.

GM 55352050 (Gen 1 elbow without the CDV)
McLeod 139160 (x2) (clutch line connectors)
McLeod 139100-42 or 139100-36 (would be long enough)(clutch line)

Thanks to Billy at McLeod Racing for taking care of my order.
1 - 2 of 2 Posts

· Registered
12 Posts
How is the over all shifter feel? Is it sloppy or when you put it in 1st and l let go of the shifter does it float back near center?

The bushings on the end of your shifter cable and transmission might be worn-out.

Sent from my SM-A136U using Tapatalk
1 - 2 of 2 Posts