[MafiaLTZ11]

Well guys, I finally received my FMIC from Cxracing. Should be installing tomorrow or next weekend. It DOES NOT come with instructions.

AND of course I will provide very one with a full install write up with pics to help anyone with this project in mind.

That being said, I do not want the SRI as I have an injen. Would like $80 + shipping which is $20 cheaper than straight from CxRacing(pm me if intersted). PayPal accepted only.

Wish me luck!

-rob

Sent from AutoGuide.com Free App

 

[shawn672]

Good luck, please take photos and provide IAT comparisons

 

[MafiaLTZ11]

This is a large task!!! Ill be finishing up tomorrow but here it is so far

Sent from AutoGuide.com Free App

 

[OnlyTaurus]

IAT2s(post-IC) for me were 2-3 above ambient on a 35 degree night. Not bad at all for a low density core.

It was a tough project to build, but all in all a satisfying one.

 

[Jnoobs]

My question is would it be worth it over the ZZP piece?


Sent from AutoGuide.com Free App

 

[Greasemonkey2012]

is the intercooler in front of the condenser or behind

This is a large task!!! Ill be finishing up tomorrow but here it is so far

View attachment 13079
View attachment 13080
View attachment 13081





Sent from AutoGuide.com Free App

 

[MafiaLTZ11]

The cxracing Intercooler is an FMIC


Sent from AutoGuide.com Free App

 

[Greasemonkey2012]

Ahahahha I know that man I mean the factory one


Sent from AutoGuide.com App

 

[shawn672]

Ahahahha I know that man I mean the factory one


Sent from AutoGuide.com App

The factory IC sits behind the AC condenser

 

[MafiaLTZ11]

finally finished!!! I'm a little tired and will do a write up tomorrow. However here is the finished product!

Sent from AutoGuide.com Free App

 

[mrw5641]

Looks good. What does that extra intercoolor do?

 

[shawn672]

Looks good. What does that extra intercoolor do?

It replaces the stock intercooler, which is smaller and sits behind the AC condenser. The new one is larger (better volume) and sits up front. It seems this and the ZZP FMIC are the two options here.

 

[scott allen]

Looks good! Looks like it needs to sit a little lower maybe 2 inches. Or does it look like that in the picture.

 

[Greasemonkey2012]

finally finished!!! I'm a little tired and will do a write up tomorrow. However here is the finished product!

View attachment 13098
View attachment 13099


Sent from AutoGuide.com Free App

Did u cut the tabs off the bumper


Sent from AutoGuide.com App