Chevrolet Cruze Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Palmer Performance Engineering is now introducing DashLogic for Chevrolet Cruze. DashLogic will take your factory DIC and/or Radio display and turn them into a gauge canvas. You can add any vehicle parameter available like boost, knock, requested boost, intake air temps, etc. You can also add aftermarket sensors like a Wideband o2 sensor to the display through our analog inputs. Not only can you view the data, you can set alarms to any condition that will display that alert as well as make chimes using the factory vehicle chimes on the car. You can do complex formulas as well, not just a simple on off alert, for example I could say (RPM > 3000 and Load > 75% and AFR > 12.5), that way my alarm only displays when I am getting on it, and does not bother me when I am just cruising down the highway.

Here is a video of the gauges being displayed
https://www.youtube.com/watch?v=vbjRlAhKp9s&list=UUfCO3G7ZxmsxFqZyHDDtPAg

Here is a quick video of a knock alert using the quiet chime. We also have a chime that is loud and will mute the radio when active.
https://www.youtube.com/watch?v=SjnLBCphcU4&list=UUfCO3G7ZxmsxFqZyHDDtPAg

This is using your radio display as a boost and vacuum gauge
https://www.youtube.com/watch?v=tDh6OTMipao&list=UUfCO3G7ZxmsxFqZyHDDtPAg


Check out or store for pricing, shipping starts today! PPE Online Store
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #4 ·
You don't lose your factory stuff, we just takeover the Navigation screen. You can still use the little ring to scroll through factory pages without unplugging or disabling DashLogic. You can't put them on the same page though.
 
1 - 3 of 3 Posts
Top