Chevrolet Cruze Forums banner

Double din with amplified audio system

2299 Views 5 Replies 4 Participants Last post by  Zac2013
Hey guys I’m kinda new here but I’ve been researching for the last couple weeks trying to figure this out. My question is I plan on putting a double din in my car and have all the speakers run through an amp. So that being said what wiring harnesses do I need and don’t need I know there’s the gmos-044 and the aswc-1 and I still want to have use over the infotainment screen above the head unit. So do I need both or just one?

Sorry if this is kinda confusing but it’s the best way I knew how to describe it

That’s for the help!
See less
Hey guys I’m kinda new here but I’ve been researching for the last couple weeks trying to figure this out. My question is I plan on putting a double din in my car and have all the speakers run through an amp. So that being said what wiring harnesses do I need and don’t need I know there’s the gmos-044 and the aswc-1 and I still want to have use over the infotainment screen above the head unit. So do I need both or just one?

Sorry if this is kinda confusing but it’s the best way I knew how...
See more
1 - 6 of 6 Posts

· Registered
Joined
·
44 Posts
I wouldn't bother.

Adding an amp is more doable.

I wanted to put in a nice stereo myself.
Would have looked like a dogs dinner.

Ended up buying the part needed to get a2pd bluetooth and adding a sub with high level inputs.
It's acceptable.

Still kind of bugs me that my 20 yr old saturn had better sound then my new Cruze.
Maybe better speakers will help.

My wife's fiat 500 which looks aside is basically Chrysler's version of the Cruze (1.4l turbo, 6 speed, glavy panels, comparable curb weight) can take an aftermarket stereo well,so it's not universal.
Def something I'll look for when i replace the Cruze.
 

· Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
I already replaced all the stock speakers with Rockford t165s’s and have all the crossovers and amp mounted in the trunk and just need to wire them up. So they’re not even going to be integrated into the factory wiring harness. So the gmos-045 will just be used for the adaptation to the factory display and steering wheel controls I’m guessing? Cus the deck will have its own amp outputs on it that I’m going to use
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top