Chevrolet Cruze Forums banner
1 - 19 of 19 Posts

· Moderator
Joined
·
10,589 Posts
I wonder if I could mod this area for sound and also run another tube to front of the fender. I'll need another airbox but I'm in no rush to try and do this anytime soon. There was a guy parting out a white 1LT last month in classifieds.


Sent from my iFail 5s
 

· Registered
Joined
·
2,084 Posts
Just a water drain I believe. Not really neccasary just there for incase you get water in the bottom of air box. What are your plans 4 having another one?
 

· Registered
Joined
·
508 Posts
I always thought that line was for the SAI system, or what's called secondary air injection. There is an electric pump that it leads to. That pump sucks that filtered air into the exhaust stream as an after treatment so to speak to reduce emissions. I believe it operates during cold starts.
 

· Moderator
Joined
·
10,589 Posts
I heard of those air pumps but I think this was just a drain tube in case the resonator got completely submerged and couldn't drain fast enough. I'm not and expert nor have I pulled this tube while the car was running to see if it has positive pressure coming from it.


Sent from my iFail 5s
 

· Registered
Joined
·
69 Posts
Discussion Starter · #15 · (Edited)
its on a 2012 cruze I just bought with 1.4 engine,the hose as been cut off it has about 3" of it coming out of the breather don't seem to effect anything I just want to leave it all stock thanks for the help junk yards throw them away just thought some body would sell me one for around $20.00 or trade some engine parts I have thanks
 

· Moderator
Joined
·
10,589 Posts
Still looking I have some engine parts to trade if you need any, all stock parts have complete 1.4 engine minus turbo
Are you able to make another thread for this engine with some pics? I'm interested in the snap in place coil pack cover that says (*bowtie* EcoTec) if you still have it.
 
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top