Chevrolet Cruze Forums banner

DrGubi’s Build

6K views 29 replies 4 participants last post by  drgubi 
Nice start. What year?

First suggestion - install a Blend Mount or something similar to hang your detector from the rearview mirror. Makes it much more inconspicuous and gives the antenna a better view at the same time. Just run a wire up from the fuse block along the pillar garnish and to the center of the headliner along the windshield. Almost no removal of parts is necessary. If you have the dimming mirror, you have access to switched power right at the mirror and can use mirror taps. Because it is an LT though I assume you do not. Mirror tap also makes a generic kit to run from the fuse panel if you prefer.
 
Lots of new stuff! Looks good! When the springs and struts settle, be ready for more teeth rattlers. You should put a link for the wrench in there too.

I'm lookin' forward to the results of the straightened CAI airflow.

You still need some smoked clear side markers to go with them rims.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top