Chevrolet Cruze Forums banner

Exhaust cutout need help

1791 Views 9 Replies 3 Participants Last post by  Sieberg20
I'm thinking of installing an exhaust cutout, but looking at the system there seems there is no room between the cat and resonator. Would it be useless to place it after the resonator? Was thinking of just cutting out the resonator maybe? Appreciate advice, thanks.
1 - 2 of 10 Posts
I just did this to mine last weekend. There is almost no difference if you cut in that spot. Cut it on the straight section right before the second cat. It’s loud enough for you to hear it, but it won’t disturb the neighbors. Obviously make sure your not to close to the o2 sensors.
Yes. I have turbo sounds at a stand still when I rev it. And it’s quiet enough to where the cops won’t blink an eye. There is a heat shield all the way around the tunnel there too so you don’t have to worry about melting anything. I pointed mine towards the driver side
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.