Chevrolet Cruze Forums banner

Flashing trouble warnings,readouts, hesitation.

2415 Views 11 Replies 6 Participants Last post by  gregbonat
Left this a.m. For 2-1/2 hr commute. Service p/s lite came on momentarily. Once on hiway, noticed my scan gauge was dropping readouts. The display was staying on, but the numbers would blank out every three seconds or so. Then the needles on the instrument gauges would drop momentarily about every 1-2 min. Service p/s warning light would also come on most of these times as well. Noticed an engine hesitation each time the gauge needles would take a dive. On way back home more warning kites came on: abs, track control, and stabil trak. I pulled over and restarted engine , new warning lites did not come back on rest of trip of 20 mi. Original problem did continue however Guess another trip to dealer is in future to see if they can figure wtf is going on now. Also noticed when I pulled into garage that the flashing warning and needles dropping on gauges seemed to stop
1 - 1 of 1 Posts

· Registered
79 Posts
Disconnect your svanguage from the obd port for a couple key on off cycles. This happens to me occasionally with my Bluetooth obd scan tool running torque and Snipseys diesel plug ins seems to go back to normal after that.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.