Chevrolet Cruze Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
86 Posts
Discussion Starter · #1 ·
I want to order the Grafxwerks smoked overlays for my sidemarkers.


Will the overlays sufficiently stick to the sidemarkers over what appears to be a raised item-number across the top of the plastic? I remember seeing a post about having to sand something off for an overlay, but I think it was in reference to taillights.

I really don't want to do alter my stock parts (nor is it worth it to me to plunk down $85 for the dark-colored aftermarkets), so I'm hoping to hear any words of wisdom from people who have these.
 

·
Registered
Joined
·
140 Posts
I have them. I sanded it down. Started with 200 grit and kept going to higher grit until I ended with 2000 grit wet sand and some polishing compound. Lenses looked stock before I put overlays on, but they were smooth as baby's butt. Looks awesome.
 
  • Like
Reactions: NuJerz2001
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top