Help with replacing mylink touch screen!!!!! Plus new system!!!!

3379 Views 5 Replies 4 Participants Last post by Metblackltz, Mar 30, 2021

hooyah765

Discussion Starter · Jun 12, 2017

I am desperately trying to find some help on replacing my factory mylink touchscreen with a kenwood double din. I have the double din but I cannot figure out which bezel and wiring kit to buy? It's a 2014 cruze diesel, but all of the kits I see are for cruzes without the touchscreen. If anyone can point me in the right directions I'd really appreciate it!!!!!

If anyone is curious the system details are:

2 12" SQ HDC3s
box will be 4.8 cubes before displacement tuned to 33 hz sealed from trunk
sundown 3k at .5 ohm
1 xs d3100 in rear and 1 xs d3400 up front
JP 240 amp alt
2 runs of + and - 1/0 sky high wire

Everything should sound pretty good, just need to figure out the double din first!

Save

1 - 1 of 6 Posts

armyofpunk

· #4 · Mar 9, 2021

Metblackltz said:
Old post but I put a 7" Double din flat screen where my monochrome screen was, it was pretty easy. I used a MyLink screen bracket and used screen brackets. I had to adjust back of radio a bit but it's pretty simple upgrade that looks stock, having a CANBUS box I was surprised when I decided to plug the faceplate of the OEM radio in that my buttons and volume knob worked, I programed each button from the headunit in correspondence to the function I wanted. Pretty happy with results.

Can you give a bit more info on this? I'm looking to do the same

What make of double din, any extra canbus information?

Thanks!

Save

1 - 1 of 6 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month