Joined
·
311 Posts
nice how to thread sciphi! helped me out today when I did my wheel studs. I do want to add for anyone who reads this. when doing the fronts all I had to do was take off the caliper (2 18mm bolts) and set aside. then take the 3 bolts joining the knuckle to the hub and just loosen them till theres a thread left. by doing that I didn't have to take off the 32mm nut and I was able to push the dust cover to the inside of the car and pulling the hub outwards and get the new studs in. there is a spot on the hub towards the front that has a groove so to speak that gives you a bit more wiggle room.
