Chevrolet Cruze Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
139 Posts
I couldn’t get the intake manifold off.it is extremely difficult to work underneath the manifold getting the vacuum hose off and the little clip to go back on took 30 minutes.really frustrating
 

·
Registered
Joined
·
139 Posts
For anyone doing this project the screw with the silicon you install it going through the intake manifold you do not screw it from the outside like I did because I couldn’t get an answer from anyone just wanted to give a heads up.so look inside where the orange nipple is supposed to be and that is where the screw goes.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top