Chevrolet Cruze Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
326 Posts
My 2015 sonic done. Great kit. I do recommend replacing the fuel injector o rings. Photos below. You can clearly see the check valve inside the intake runner has disappeared. If you install the kit with the BNR spacer you need to use the port closest to the intake due to check valve body clearance. See photo. Great kit!
 

Attachments

·
Registered
Joined
·
326 Posts
Good work, you really don't need the hose clamps there. The most pressure that hose will ever be under is 1/2 a PSI unless something else is broken, so I chose not to include hose clamps in the V1 kit. It doesn't hurt to have them, just not necessary.

Looks good though! Thanks for the feedback!
I had those hose clamps sitting around collecting dust from a previous project. I figure I put them to good use. Your correct I really did not need to use them. Again thanks.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top