Chevrolet Cruze Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
716 Posts
Blasirl,
In the picture you see the top of the screw inside to the manifold gallery. See my attached picture. I used a different Loctite. Technically you can close the "hole" with Loctite only, the screw is to hold that Loctite in place and vice-versa, to hold the screw to unscrew :)
Regardless what you will use, first of all clean up the gallery very well. I used detergent then alcohol with a long brush. It won' matter what port you close but it's easier to use the one closer to the manifold and close the other one.
 

Attachments

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top