Chevrolet Cruze Forums banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
8,012 Posts
Tighten the bolts to 66lb-ft + 45 degrees (about 1/8 of a turn).
Sounds TTY bolts. Do you want to re-torque them that much on a re-use?

It looks like Chevy did a good job on the rustproofing, but the bolts - not so much. Might not be a bad idea to replace them.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top