Chevrolet Cruze Forums banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
954 Posts
Nice write up. I noticed a bit of seeping on both of my CPASV seals as well. In my case, I loosened the bolts and re-torqued them down. No leaks from them yet in the past 1000 miles.

As a side note, the alldatadiy service manual lists 71 in-lbs for my CPASV bolts for my 2013 1.4T. Maybe the spec was changed from 2012-2013 Cruze?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top