Chevrolet Cruze Forums banner

How-To: Replace door speakers

78732 Views 34 Replies 20 Participants Last post by  Miguelcon74
Here is my first how to so i hope it comes out well. I took numerous photos and anyone having questions feel free to ask. On with the show...
Land vehicle Vehicle Car Vehicle door Family car

Here we have our right rear door. Basic at this point.
Auto part Technology

Here's what's going in. Polk Audio components and Crutchfield speaker adapters.
Auto part

Here's a close up of the speaker adapters.
Sink Plumbing fixture Kitchen sink Automotive exterior Bumper

Here's a close up of one of the two torx bolts holding on the door. They are size T15 btw. This one is in the arm rest, the other is behind a plate by the door handle.
Wire Snow Technology Vehicle Auto part

Here is the door panel removed. You can see two cables. The one with the yellow is the door latch, the other is the plug for the power window switch.
Wire Fuel line Auto part Automotive lighting Engine

A close up of the latch connector.
Machine Auto part

A close up of the harness for the window switch. Push the button on the side, and it pops right off :)
Vehicle Motor vehicle Vehicle door Car Automotive exterior

The door with the interior panel removed.
Vehicle door Automotive exterior Vehicle Car Bumper

The backside of the interior panel. You can see where the connectors are that hold it to the door.
Audio equipment Loudspeaker Car subwoofer Subwoofer Auto part

Here is the door speaker. This one is the Pioneer upgrade system. More to come in the next post.
See less See more
  • Like
Reactions: 2
1 - 1 of 35 Posts
1 - 1 of 35 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.