Chevrolet Cruze Forums banner
1 - 4 of 4 Posts

·
COTM Winner
2014 Cruze Diesel, 2007 Cobalt, 1981 Camaro Z28, 2017 Volt
Joined
·
6,950 Posts
The stock 18s have an offset of +42, so you'd actually be just a tiny bit better off with a +40 ("pushes" the wheel out 2mm).

Proper tire size will be 225/45R18.
 
  • Like
Reactions: DjSuavee

·
COTM Winner
2014 Cruze Diesel, 2007 Cobalt, 1981 Camaro Z28, 2017 Volt
Joined
·
6,950 Posts
Assuming you're not lowered, it shouldn't rub on the fender/quarter, so yes.

If you had the same offset, it'd be about half an inch wider on each side.

Our MSR 013s are a 17x7.5, with a +38mm offset, and there is still plenty of room for another 1/4" or so.
 
  • Like
Reactions: DjSuavee

·
COTM Winner
2014 Cruze Diesel, 2007 Cobalt, 1981 Camaro Z28, 2017 Volt
Joined
·
6,950 Posts
Not a problem! Post some pics when you have the wheels on!
 

·
COTM Winner
2014 Cruze Diesel, 2007 Cobalt, 1981 Camaro Z28, 2017 Volt
Joined
·
6,950 Posts
Yes, it'll need to be 5x105. It won't fit, otherwise.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top