Chevrolet Cruze Forums banner
1 - 1 of 20 Posts

· Registered
2014 Cruze TD
1,068 Posts

I want to do this repair myself just to resolve a possible electrical issue I'm having. But looking at the repair steps, it seems a lot of other cables need to be removed and other parts are listed. Look at steps 5 and on at this link, why do we need to do all that to replace a cable with just 2 bolts?

Are we certain #22754271 is the only thing we need? We are certain the "bad crimp" is the big cable, and not the smaller starter ground that bolts on the side? Looking at my car it looks like just removing the battery cable from the battery terminal, and unscrewing it from the frame ground, then rerunning the new cable through the sensor is all that should be needed, so all these other steps are just confusing me.
1 - 1 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.