Chevrolet Cruze Forums banner

Misfire No Codes Or Lights

8400 Views 3 Replies 3 Participants Last post by  Noahbergfeldt
Hello all,
I have a 2013 cruze eco with 14,000 miles on it. It is experiencing a misfire on cylinder 2 quite a bit under load. Cylinder 1 also misfires about 1/4th as much on similar pulls. There are no lights on or codes stored. I first replaced the spark plugs with those of appropriate gaps the stock delco plugs in fact gapped at 0.30. I then moved them around to see if the misfire followed. It didn't. I then replaced the coil pack from a buddy of mines cruze and the same cylinders misfiring. Back to stock coil. I will next try moving fuel injectors around. I am hoping I don't have burnt valves or cracked pistons. It seems so unlikey with 14,000 miles but I know the engines are notorios for pistons.
Any insight would be appreciated
1 - 1 of 1 Posts

· Registered
Joined
·
17 Posts
Hello all,
I have a 2013 cruze eco with 14,000 miles on it. It is experiencing a misfire on cylinder 2 quite a bit under load. Cylinder 1 also misfires about 1/4th as much on similar pulls. There are no lights on or codes stored. I first replaced the spark plugs with those of appropriate gaps the stock delco plugs in fact gapped at 0.30. I then moved them around to see if the misfire followed. It didn't. I then replaced the coil pack from a buddy of mines cruze and the same cylinders misfiring. Back to stock coil. I will next try moving fuel injectors around. I am hoping I don't have burnt valves or cracked pistons. It seems so unlikey with 14,000 miles but I know the engines are notorios for pistons.
Any insight would be appreciated
I know this isn’t helpful but I’m having a similar issue and can’t figure out why. Same thing with no codes however my reader on active misfire display showed 60 misfires on one cylinder in one pull
 
1 - 1 of 1 Posts
Top