[Rivergoer]

Not sure if all the pioneer systems all have the head unit: 22879332, but mine has the pioneer badge on the front door speakers, and the head unit is the same. I know this because I recently had an idiot attack, left all windows (including the moon roof) open. Heavy rain soaked the inside. I have them down to the board level and see no signs of water damage except on the button control panel. I'm thinking of getting a new panel which is like $70 from what i've seen.

I know this is an old topic but if the panel doesn't fix mine, is anyone still fixing the radio, or could perhaps tell me how to fix? I'm decent with electronics. My job is working on cell phones and I'm learning microsoldering from the pros i work with.

Thanks for any help.

Found this REPAIR SERVICE for your radio model on eBay.

I used a similar eBay repair service (not this one) to fix/refurbish a 2003 GMC Yukon radio.

Worked out quite well and cheaper than new. Bonus, since they fixed and returned MY radio, no need to pay the dealer to reflash radio to match VIN

 

[taurussho]

Found this REPAIR SERVICE for your radio model on eBay.

I used a similar eBay repair service (not this one) to fix/refurbish a 2003 GMC Yukon radio.

Worked out quite well and cheaper than new. Bonus, since they fixed and returned MY radio, no need to pay the dealer to reflash radio to match VIN

Thanks for the info. I also found this one: Has anyone used them by chance?

 

[taurussho]

https://www.cd4car.com/2012-2013-ch...ion-single-cd-am-fm-mp3-radio-receiver-block/

 

[Blasirl]

I can't quite figure out what Gen you have, but if it's a Gen I then I would go this route myself:

First locate a donor vehicle with the same or better features than what you already have and buy the system.

Second, read this:[h=1]How To Disassemble Radio To Program VIN[/h]
Third read this:

[h=1]Updated Quick and Dirty Mylink Upgrade DIY for Gen 1 Cruzes[/h]
and for about $100 you have a new system!