[DavidW]

Hey Guys,

I just picked up a cruze a few days ago 2013 Cruze 2LT W Mylink without navigation without pioneer. I have been looking threw the forumn for awhile for stereo upgrade. and i see the recommended is the PAC-GM44 to get line outs for an amp, I have looked into this, and such but im curious about getting the signal to the speakers themself? does the PAC do this as well? out to the amp, amp back up to the PAC? I am currently just thinking right now of just adding some 6x9s to the rear deck, but eventually it will get new door speakrs/tweeters/ sub all that good stuff. if infact the wires to the speakers need to be taped into somewhere other then the PAC, i have seen they are on the driver sides under the panel near the hood release but are tehy infact in that big connector, or seperate from that? any help is greatly appreciated

 

[brian v]

Welcome to the cruze talk Be cool stay cozy keep cruzen and Best Wishes !

The rear door speaker wires can be located at the kick panel and are bundled in the wiring harness .. there are a few posts with the color coding in audio and electronics forum ..

 

[trevor_geiger]

Welcome to the forum! Post some pictures.

 

[DavidW]

Ill get some pictures up when the Fiancee gets it home right now its getting some new front tires.

So the speakers are infact in that large harness and large connector. hrmm. sounds like a pain...

 

[DavidW]

Alright requested pictures.

2

ok its actually her car, and as you can tell she loves it

the two tone interior was really what sold it.

this was within 24 hours of the purchase, she had to get pictures with her new car, and well her Horse....with a bunch of 1st places

Mylink without Navigation, Without Pioneer

Out with the old( blew crank bearings) in with the new