Chevrolet Cruze Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #5 ·
That would be the dipstick hole, was cleaning ports with que tips, I know pretty dumb but was working till I somehow let go at the wrong time. I thought well stick a vacuum and by luck I would suck it back out, but she gone swimming somewhere. So now what to do, one of those man things are going great turned into a nightmare.
 

·
Registered
Joined
·
21 Posts
Discussion Starter · #7 ·
Don't have access to a lift, and think I'll drop the oil out the pan and by luck maybe it will be sitting at the drain hole. Or have her towed to a shop, or if anyone has dropped the pan to let me know how that goes I'm all in.
Heck maybe I could have my kid tape me doing it and we could make a show of it.
 

·
Registered
Joined
·
21 Posts
Discussion Starter · #10 ·
Thought of that, already put the valve cover back on. And the Dealer did replace the gasket at 77,000 miles under warranty cause it was leaking bad, and the oil pan is leaking again at 97,000 miles. I'm out of warranty but they should do it again if you ask me. But sure that won't happen.
Love the camera idea, should have waited to put that valve cover on for that.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top