Chevrolet Cruze Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
So my Cruze doesn't have the pioneer setup and I was wondering If someone makes a plug/play converter similar to this one but with six outputs?

The first 4 would be the corner channels and last 2 would be the sub feed. I'd rather not run a pac aa-gm44 with a loc ontop. I don't want to burn the stock head unit out as that's what i'll be using for interface.

Thanks guys! :popblood:
 

·
Premium Member
Joined
·
2,495 Posts
So my Cruze doesn't have the pioneer setup and I was wondering If someone makes a plug/play converter similar to this one but with six outputs?

The first 4 would be the corner channels and last 2 would be the sub feed. I'd rather not run a pac aa-gm44 with a loc ontop. I don't want to burn the stock head unit out as that's what i'll be using for interface.

Thanks guys! :popblood:
You can get several other oem integration units from the likes of Audiocontrol, MMATS Pro audio or you can with a full on processor if you really want to get control of your audio minidsp, bit one/10, mosconi etc
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #3 ·
You can get several other oem integration units from the likes of Audiocontrol, MMATS Pro audio or you can with a full on processor if you really want to get control of your audio minidsp, bit one/10, mosconi etc
Cool i'll look around, I was just looking for something simple like the pac unit except with six outputs. Although I could just use 2 of them for the sub and just use the HI imput on the amp. Thanks again
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top