Chevrolet Cruze Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Pairing code is froze on my screen and wont go off how do I put the code in my phone so my Bluetooth will connect
 

·
Super Moderator
2014 LT program car, Pull Me Over Red
Joined
·
10,340 Posts
Pairing code is froze on my screen and wont go off how do I put the code in my phone so my Bluetooth will connect
This is the only thing I could find so far. It is from a post by @Ma v e n , but it is for the 2019 Cruze.

Deleting a Paired Phone
  1. Touch the Phone icon on the Home Page or the phone icon on the shortcut tray near the bottom of the display.
  2. Touch Phones.
  3. Touch the information icon next to the connected cell phone to display the cell phone’s or mobile device’s information display.
  4. Touch Forget Device.
This is from Quora:
How do I reset the Bluetooth on a Chevy Cruze?
Based on my findings over the internet, this might help.
  1. Press the CONFIG button.
  2. Select Phone Settings.
  3. Select Bluetooth.
  4. Select Device List.
  5. Select the phone to delete and follow the on screen prompts.
If the above step does not work, follow the below.
  1. Park the car, unplug all cables like USB, aux.
  2. Turn engine off, open the driver's side door as wide as it will go and leave it open for five minutes.
  3. This will trigger the system reset. After five minutes turn the car back on and now attempt to delete the devices in the list.
And this from the forum:
 

·
Premium Member
Joined
·
2,131 Posts
the code will disappear once your phone pairs with radio. you need to input that code into your phone if required on the PHONEs pairing screen. not all phones require this PIN
 
1 - 4 of 4 Posts
Top