Chevrolet Cruze Forums banner

Panasonic Ignition Relay, well not exactly what I expected.

732 Views 0 Replies 1 Participant Last post by  NickD
This says it all:

View attachment 169410

Forgive the slight blur, too lazy to did out my good camera. In testing both relays, the OE gives a tiny click when energized, this one has more like a clunk, solenoid current is exactly the same at about 125 ma. Using my best ohmmeter, contact resistance is 0.000001 ohms. Didn't use a current test, again too lazy. As is the pin spacing, but as you can see the contacts tabs are quite a bit larger.

Tabs on the OE are 32 mils, 50 on the Panasonic, thinned those to 38 mils for a nice tight fit, plus trimmed the edges exactly like the OE. The one shown is my spare, its not like I don't want to show my excellent work, in the Cruze, and I don't want to remove it, may never have too.

Will toss the original in my plastic bag of spare parts, like fuses and bulbs, just in case.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top