Chevrolet Cruze Forums banner
Status
Not open for further replies.
1 - 20 of 89 Posts

· Banned
Joined
·
372 Posts
Discussion Starter · #1 ·
Hi Guys. We manufacture Electric Vehicles in India (High speed Electric

Motorcycles and small utility in-door/outdoor scooters.)

Recently We have also started the following products:

1.) Bi-xenon 2.6" and 3" Projection conversion for ANY CAR Headlights, (Both RH and LH Drive) -

2.) Exhaust Mufflers- Aluminum, Stainless Steel, Carbon Fiber, Single Tip, Twin tip, and a lot more options,

3.) In-Dash SatNav system, compatible to your car. (Check pics below) This system includes Bluetooth connectivity for phone audio (Hands free) SatNav with Maps, Dvd playback, USB, Memory card reader, photo viewer, etc. The System hooks up to the Car's Can Bus system and also performs primary functions.

4.) Air filters: Cotton filters (like K&n) available in various sizes (Universal fitment) with special silicon piping for cold air intakes. Stock Replacement box filters.

More products coming up. I am starting up a new brand for these above products, The formalities are in progress, once I have set everything, I will post again with 'CRUZE Exclusive' Parts.

All our products are very economical and have 18 months to 2 years international warranty (depends on product).

For now Please comment on my pics below. This is my Cruze (Yes I love the Car). :D
 

· Banned
Joined
·
372 Posts
Discussion Starter · #6 ·
not a fan of those lights, look to tacky in my opinion
Sir, these lights are not for looks. They have an excellent focus and lovely low and high beam. Projectors are compulsory in many places now. On low beam you get light as much as on high beam due to its concentration and low wastage, WITHOUT annoying the opposing car's driver. And its excellent on flash (High beam pass) as there is no need for a second filament to light up. Just a small metal piece uncovers the necessary lens area.
 

· Banned
Joined
·
372 Posts
Discussion Starter · #7 · (Edited)
I just would not connect the halo's cause those should seriously stay on BMW's. But i like how they headlights look, with the projection. Looks like eyes on a car lol.

How much is the sat nav btw?
Sat Nav + Bluetooth phone audio connectivity, + Photo viewer + Dvd + Audio Cd's (Ofcourse) + MMC + USB + compatible with the existing CAN BUS and displays all the original features in a small translucent Pop Up. + Rear view Camera attachment possible
18 Months Warranty.

Price : 520 USD + shipping.
 

· Banned
Joined
·
372 Posts
Discussion Starter · #12 ·

· Banned
Joined
·
372 Posts
Discussion Starter · #13 ·
Does the Sat Nav support A2DP (music/audio streaming via Bluetooth), and do you lose any OnStar or diagnostic functionality with this new unit?
No, You DO NOT Lose any existing functionality. All the features that are displayed in the original screen are displayed here in a pop up. So basically all OnStar and Diagnostic functionality works, Even better in Color and high res..

No, it does not support A2DP, but can play USB, MMC, Dvd, Cd, Aux(Standard i/p pin)
 

· Banned
Joined
·
372 Posts
Discussion Starter · #14 ·
i love the light that the headlights give off im just not liking the actual design of the headlights....just my opinion....but nicce cruze tho
Thanks for the Cruze :D. The lights are really amazing. You can see the road very very nicely. Its basically how you would see the road in a BMW with stock projectors and HID. You also get the cluster (With black interiors, one projector and one open high beam) made for the cruze from some chinese manufacturer. But these give you more advantage:

Maintain stock look (A little)
You do not lose the motorized adjustment which you lose in the aftermarket clusters
Excellent light with Bi-Xenon (Those come with a single projection beam)
Cheaper :D
18 months warranty.
 

· Banned
Joined
·
372 Posts
Discussion Starter · #15 ·
Please post full details on the SatNav unit. Is the internal EQ set up like the factory or is it flat like an aftermarket unit? Any RCA pre-outs? Wattage output the same? Very interested.
The unit is a Plug and play unit. Which means there is no wire cutting. Socket to socket connections.
It connects to your existing CAN BUS System, which allows you ALL functionality including EQ exactly of the stock, that runs in a 'pop up' (see pics) when you operate them. Fitting them is an hour's job. You do receive a DIY manual. There are many options we can offer for RCA pre-outs, but the standard wiring made right now consists of using the standard speakers. However, like i said, you can always upgrade.
 

· Banned
Joined
·
372 Posts
Discussion Starter · #17 · (Edited)
And the cost/availability?
1.) Projection Headlight Conversion Kit (Bi xenon 35W) 6000k with Fitting accessories, Gel for re-sealing, Manual (DIY) Full KIT : 160USD + Shipping. 18 months replacement warranty

2.) In-Dash stock replacement system with the above mentioned features: 520$ + Shipping with 18 months warranty.

3.) Filters and mufflers (In process) : Subject to change depending on product selected.
 

· Banned
Joined
·
372 Posts
Discussion Starter · #21 ·
I see the rims but I don't see any that match the cruze bolt pattern. Am I missing something?
The Cruze uses a standard 5 bolt pattern. These rims are 100 - 114mm universal PCD. So they fit. ALTHOUGH. They DO NOT Fit 100% concentric. Thus they produce a noticable vibration at about 100 Kmph. But we have a solution for these things as well. A simple sleeve, machined precisely to fit between the rims and wheel hubs. This ensures 99.99% accuracy = Stock accuracy. Thus You can achieve a perfect fit. So incase you put rims, make sure you have a sleeve between the Rims and your wheel hub to avoid vibrations between 100 to 105 kmph, and also to avoid screwing your wheel bearings. Once you have the sleeve in place, its all set and nothing to worry about :D

Cheers

Hemank
 

· Banned
Joined
·
372 Posts
Discussion Starter · #22 ·
How does one control the SatNav unit? Is it touchscreen or is it controlled just like the factory installed SatNav through the button controls below the screen?
It is a touch screen indeed. I will upload high res photos of the same unit soon. I see a lot of interest on this forum. Will do it soon.
 

· Banned
Joined
·
372 Posts
Discussion Starter · #23 · (Edited)
so this changes the actual radio itself or is it just a upgraded screen? This sounds great just a little leary of changing something like that with an unknown product. I would like to see directions on installing this. I would love to see and hear from people that get this installed..
You have two options:
bigger screen than the one avaliable in the ECO model, along with an additional DVD player to be mounted in the glove box.
Advantages : You can still play from your 6 cd changer as well as the DVD player
Drawbacks: Additional space occupied for storing the DVD player

Or an entire unit from the Screen all the way till the CD player section. (The DVD player replaces your existing CD player).

Advantages: No additional space req.
Drawbacks: You lose a 6 CD changer and get only one DVD player.

That is the screen available here even in the top end models. So we sell a lot here. Our product has been fitted on multiple Cruze's without problems so far. It is safe and does not void your warranty, as there is no wire being CUT. Its a plug and play unit with safety cut offs.
 

· Banned
Joined
·
372 Posts
Discussion Starter · #30 ·
So it's a DIY projection kit? I'm thinking so, otherwise I'd think the price would be much higher. When it comes to stuff like this, I'm not much of a DIY type of person...:eek:

I can send you completely assembled headlamps as well. But that will naturally be more expensive.
 

· Banned
Joined
·
372 Posts
Discussion Starter · #31 ·
Do you have any pictures of it installed in an Eco model? Also, do you have any US distributors who can vouch for your company?

Pictures of the Headlights, Satnav, Filters or mufflers? I have uploaded pictures of My 2.0L Diesel cruze fitted with Headlights and the In-Dash stock replacement SatNav system with Can Bus interface on the first page.
 

· Banned
Joined
·
372 Posts
Discussion Starter · #32 ·
Do you have any pictures of it installed in an Eco model? Also, do you have any US distributors who can vouch for your company?
I do not have any dealership in the US as of now. But I would like to expand soon. If you are willing to re-sale my products, we can talk business :p
 

· Banned
Joined
·
372 Posts
Discussion Starter · #35 ·
Sorry, I was talking about the in dash unit. Does it keep the stock appearance? Do the hard buttons do anything after installation? Will my steering wheel buttons still work?
Ok Let me brief you on this.
First of all. Your Car WILL look stock. And very nice too.
When you start it, and your radio/CD/DVD/Satnav is off, you will see the clock (shown in one of my images).
Once its powered on, with the standard power s/w, you can use all standard functions that exist in your vehicle at the moment through the normal buttons you use at the moment. (The buttons on the dashboard and on the steering wheel). These all will generate a translucent 'pop-up' that basically shows what you would see on your current screen. (Check in one of the images). You can minimize the pop up any time and use the following functions by the touch screen:
Navigation options
Bluetooth connectivity and phone call answer and reject
DVD Video
Photo
E-book
Settings.
You can also control the USB and MMC through the touch screen.

I hope its clear.
 

· Banned
Joined
·
372 Posts
Discussion Starter · #36 ·
I would consider it depending on the terms, however quality and reliability of the manufacturer is most important. I work in retail and B2B sales and I won't commit to selling anything without using it first!
I could send you one piece as a Sample. You can use it and test it the Way you like. Then probably after you're satisfied, we can work out a Deal.
 
1 - 20 of 89 Posts
Status
Not open for further replies.
Top