Chevrolet Cruze Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
211 Posts
Discussion Starter · #1 ·
Hi there

I got a Kensun bixenon HID kit and was going to do it in the stock housing.
Now I am considering doing a prebuilt projector housing from one of the vendors here.

If the housing accepts regular single xenon HID bulbs, will it accept bixenon as well? Is there a bulb size difference? I am referring to 35watt not 50.
I have 2 weeks left to return/exchange the HID kit, so I don't want to find out the hard way that it won't work after the fact. I'd rather keep all the packaging together if I am returning instead of opening and trying if I don't need to.

Thanks
Nick
 

·
Registered
Joined
·
211 Posts
Discussion Starter · #2 ·

·
Registered
Joined
·
211 Posts
Discussion Starter · #4 ·
Looks like there are no bixenon H7 bulbs. Yes the ones I have are H13 (9008) and are bixenon to fit the stock housing.
Where could you tell that I needed an H7? Was it in the link I provided? Maybe I overlooked that somewhere.

Seems like I would then have to stick with a halogen for the brights, which is fine by me even though I would prefer the bixenon.
 

·
Registered
Joined
·
211 Posts
Discussion Starter · #6 ·
There we go, thanks.
I emailed them asking for a pic of the cutoff. I'm not keen on a DIY projector, even though it would be nice.
There are alot of generic no name assemblies out there on the internet, I want something pretty good, doesn't need to be perfect.
 

·
Registered
Joined
·
211 Posts
Discussion Starter · #9 ·
There are two little housings, one reflector and one projector within the headlight. H7 low H1 high.
 

·
Registered
Joined
·
211 Posts
Discussion Starter · #11 ·
You can wire or not wire the halo and leds, owner preference. Most have them though, no getting away from it.
 

·
Registered
Joined
·
211 Posts
Discussion Starter · #13 ·
I am still in the learning phase with the install of these and most do not come with instructions.
As far as I know, most are meant for halogens, but many will also accept HID bulbs too.
See I got H13 HID kit, now I have to exchange for H7 if I do the projector.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top