Chevrolet Cruze Forums banner

Rack and Pinion noise when steering wheel is turned back and forth

6293 Views 8 Replies 5 Participants Last post by  craig85006
I have a 2011 Cruze LTZ RS. I noticed this AM that the rack and pinion makes a clicking noise when I turn the wheel back and forth. At first I though it was a bad CV Joint. But, the noise is present regardless if the car is moving or not. I don't know what it could be.. I can feel the click when I touch the tie rod or even the control arm. This is only apparent on the left side. I had the rack and pinion replaced a few months ago under the GM factory recall.

Could I possibly have another "bad" rack?

Please advise.

Thank you.

Craig Lambert
Phoenix, AZ
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top