Chevrolet Cruze Forums banner
1 - 1 of 19 Posts

· Registered
246 Posts
Couple of things I would do. First if you are concerned about the caliper being stuck, replace it or rebuild it. An entire caliper is not very expensive. A rebuild kit is even cheaper. It takes all of about 15 minutes to rebuild a caliper. Replace the flex line to the caliper. They can degrade on the inside and cause the caliper to hang.

When you put it back together lube the caliper pins and I always lube the brake pad mounting hardware. If your new pads do not come with mounting hardware make sure you clean up the old ones before putting back together.
1 - 1 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.