Chevrolet Cruze Forums banner

Replacing my turbo - need last minute advice.

8326 Views 12 Replies 10 Participants Last post by  JeffBazell
Long story short, I'm quite sure my turbo is cooked and I have bought a used one off Ebay along with one of the newly designed oil feed lines. I should have them shortly, and the only piece of the puzzle that I'm missing is whether there are any gaskets or anything else I will need to do the job.

I know several people here have swapped out a turbo, but no one has given full details on the job. There is no GM dealership near me or any online resource I've been able to find, so any help would be greatly appreciated.
1 - 1 of 1 Posts

· Premium Member
Joined
·
7,547 Posts
I'd suggest getting your hands on a service manual, perhaps a short-term alldata subscription. This engine uses a number of torque to yield bolts making them single-use. You'd need to buy NEW bolts to put things back together.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top