Chevrolet Cruze Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter #1
In the process of installing the Rostra kit # 260-1020 Cruze I ran into a snag.
The mounting points of the L.E.D. bars to the bezels is very weak & fragile (Lame) to say the least. Not sure why Rostra did not supply brackets to utilize the embedded brass inserts for mounting. The recommended mounting points break the plastic by barely tightening of the screws. Seriously, just the compression of the supplied lock washers cracks the thin plastic. No way these would hold up going down the road. WTF! I need to fabricate my own brackets now. Hope these things are worth the time & trouble once installed. Anyone run into this before?


285198
 
1 - 1 of 1 Posts
Top