Chevrolet Cruze Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Hello,

My Cruze's shift knob will not move into PARK after it's placed in R, N, D, etc. I am able to move it between R and N and D, but once I want to place it back into Park the shift knob will lock and will not go higher than Reverse. My workaround for this has been to place the car in Neutral, release the break and press the break once again, after releasing and pressing the break pedal I can then shift the knob into Park. When I do so, I also hear a noticeable 'click' when crossing from Reverse to Park that wasn't there before.

I haven't been able to find an explanation for what may be causing this issue. Any ideas would be greatly appreciated.

Thanks
No worries this just happened to me and I thought that my transmission was missing up and that was not the case Thank God! When this happens all you need to due is pop the hood and place you crank shift back on the screw knob and it will move into gear! You must change the part that’s inside your crank shift or put some adhesive on there to seal it from coming off again! Keep in my, if you do place the crankshaft back on and the plastic rim that’s in the middle doesn’t latch on, be careful because once your in reverse, you can’t put your car into park, neutral, or drive and if you are by yourself you are going to want to keep your foot on the brake and also lift your emergency brake and call for help! Again this happened to me 3 weeks ago and after overnight YouTube’s and google I was able to fix the issue and saved me thousand of dollars!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top