Chevrolet Cruze Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi, new to the forum. I just replaced my flywheel using the Mt removal diy on here. After getting it back together, it starts and works from 1 to 4, but the shifter won't move to the right, and it's a little difficult to find reverse almost like something isn't lined up. Can someone give me some advice? Btw 2013 1.8 manual ls cruze
 

·
Administrator, Resident Tater Salad
Joined
·
17,488 Posts
Hi, new to the forum. I just replaced my flywheel using the Mt removal diy on here. After getting it back together, it starts and works from 1 to 4, but the shifter won't move to the right, and it's a little difficult to find reverse almost like something isn't lined up. Can someone give me some advice? Btw 2013 1.8 manual ls cruze
Shift cables need to be aligned, or the lockout thing is possibly pressed in.

http://www.cruzetalk.com/forum/34-gen1-1-4l-turbo/18217-what-piece-if-eco-6mt-trans.html
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top