Chevrolet Cruze Forums banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
8,012 Posts
Keep in mind that the BCM is able to monitor the current going into the battery. If we're only looking at the voltage, we're only getting half the story.

Note, if you'd added any connections to the battery (such as for a stereo), you might want to review how it's connected. Depending on the details, the BCM may be mistaking current going to your add-on as battery current. That will adversely affect charge management. The right way to do it is to either connect to the frame ground, or route the wire thought he current clamp so it can be subtracted from the current going to the battery.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top