Chevrolet Cruze Forums banner

Thinking of installing an aftermarket Pioneer double din

3159 Views 3 Replies 3 Participants Last post by  kylevh21
I have been doing some research on this for a few days and I think I have an idea of the harnesses and junk I will need. Is there anything I'm missing? I'm trying to retain the On star and door chimes AND steering wheel controls. So here's what I got so far:

1) Metra 99-3011s double/single din kit
2) Metra 40-EU55 antenna cable
3) Metra GMOS-044 GM factory integration interface adapter for 2010 and up
4) Metra axxess ASWC universal steering wheel control interface

Is this it? Any help would be greatly appreciated.
1 - 4 of 4 Posts

· Premium Member
Joined
·
77 Posts
That should work fairly well. But I will warn you ... I have never been able to retain the steering wheel controls on any of my cars.
 

· Registered
Joined
·
338 Posts
The steering wheel controls work on my car had to cut the wire instead of tapping into it cut the cars Bluetooth answer and hang up function still work after installing an aftermarket unit
pm me if u run into something
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top